- Embossing Thermal Lamination Film
- PET Thermal Lamination Film
- BOPP Thermal Lamination Film
- Metalized Thermal Lamination Film
- Lamination Steel Flim
- Holographic Thermal Lamination Film
- Glitter Thermal Lamination Film
- 3D Thermal Lamination Film
- Soft Touch Thermal Lamination Film
- Anti Scratch Thermal Lamination Film
- Degradable Organism Thermal Lamination Flim
Precoating tactility film coated speed specification?
pre-coating film coated speed specification?
According to the same temperature, pressure, different speed change under the condition of precoating tactility membrane and a variety of paper to print the effect of the composite detection, will accelerate the precoating precoating tactility film laminating specification?
< br / >
1, the scope of work normally for 6 ~ 12 m/min.
< br / >2, in the paper the quantitative high, tightness, moisture, dust, ink layer area is large, deep color, low working environment temperature, humidity and gas flow, complex, poor brightness, should be appropriate to reduce the working speed, good composite effect shall prevail; 4%;
< br / >4, in 12 m/min running speed of 15 m/min or less work area, such as the amount of rights still to 1 m/min to adjust production speed, the output value per level variables change happens dramatic change.
Working time, namely, running speed, decided to working temperature conduction process and order of sub gradual transformation process, the merits of the surface wettability of machined part print, also decided to hot melt adhesive particulate matter decentralized state, the strength of the bond.
< br / >